ISC-H001  — photo 1
ISC-H001  — photo 2
ISC-H001  — photo 3

METAL DETECTOR

ISC-H001

Hand Held Metal Detector > 9V battery is included > Enable and disable detection function > 2 levels of sensitivity > Sound, light or vibration alarm for metal detection > Controls sound alarm or vibration alarm separately

ئامێری دۆزەرەوەی کانزا بە دەستی > پاتری 9V لەگەڵدایە > کاراکردن و ناچالاککردنی کارایی دۆزینەوە > 2 ئاستی هەستیاری > زەنگی دەنگ، ڕووناکی یان لەرزین بۆ دیاریکردنی کانزاکان > زەنگی دەنگ یان زەنگی لەرزین بە جیا کۆنتڕۆڵ دەکات

كاشف المعادن باليد > يتم تضمين بطارية 9V > تمكين وتعطيل وظيفة الكشف > 2 مستويات من الحساسية > إنذار صوتي أو ضوئي أو اهتزازي للكشف عن المعادن > يتحكم في إنذار الصوت أو إنذار الاهتزاز بشكل منفصل

Ask for price on WhatsApp →

// YOU MIGHT ALSO LIKE

ISC-D118  — Metal Detector
Metal Detector

ISC-D118

Walk-through Metal Detector > 18 detection zones with corresponding indicator lights > Minimum detect target: CNY ten-cent coin > 3.5 inch LCD with an interactive, user-friendly interface > Monitor and display the real-time signal strength of environmental interference > Automatically searches operating frequency (20 levels available) > Counting passing number, pass/return numbers, and alarm number > Pass/Return statistics, alarm statistics, and searching by day > Easy-to-install modular design > Safe low-voltage design > Reliable and stable aviation connector > 9 alarm tones with 10 adjustable volume levels, mute mode and alarm duration: 0–10 s > 255 adjustable sensitivity levels > Separate parameter configuration for 12 supported scenarios > IR remote controller > Multiple IR detection modes > Supports lead-acid batteries (optional)

Paas Code Wireless  — Access Controls
Access Controls

Paas Code Wireless

2000 user capacity 433Mhz Wireless Wiring Free Installation Wireless exit button wireless exit remote wireless access control board

20M UHF RFID Reader UR-300 — Accessories
Accessories

20M UHF RFID Reader UR-300

Product Parameter Parameter Descr1ption L-POWER Model UR-300 Product Name UHF RFID Long Range Card Reader Dimension 260x260x70mm Recognition distance Up to 20 meters Default communication interface Wiegand26, Wiegand34, RS485 Option customized RS232,RJ45 ( Ethernet ), WiFi, Relay System parameters ARM7 Working frequency National standard (920~925MHz) American standard(902-928MHz) European standard (865-868MHz) Other multinational frequency standards (customized) Group reading performance <200 tags Tag protocol Support IS01 8000-6B, IS018000-6C (EPC GEN2) protocol electronic tags Frequency hopping mode Broad spectrum frequency hopping FHSS) or fixed frequency, can be set by software; Working mode Active mode, response mode, passive mode, etc. RF power 0-33dBm (power software adjustable) Antenna parameters 9dBi linear polarization antenna (built-in) Working voltage +12V Recognition prompt Buzzer or LED flashing Power consumption <12W Working temperature -20℃ ~ +70℃ (customization required if out of range) Working humidity 20% ~ 95% (no condensation) Storage temperature -40℃ ~ +125℃ Appearance/packaging size 260*260*70mm/ 355*260*80mm Net weight 2400G Gross weight 3700KG Secondary development Provide dynamic link library (DLL) and demonstration software source code to support secondary development. Remarks The recognition distance and group reading performance depend on the tag performance and specific application scenarios, and can be customized as required

Open  UTP CAT6 RJ45  100PCS/BOX (EASY) — Networking Component
Networking Component

Open UTP CAT6 RJ45 100PCS/BOX (EASY)