// YOU MIGHT ALSO LIKE
No Touch Button
UHF-05USB UHF USB Desktop Reader and Writer
UHF-05 is a high performance UHF RFID desktop Reader. It is designed upon fully self-intellectual property. Based on proprietary efficient digital signal processing algorithm, it supports fast tag read/write operation with high identification rate. It can be widely applied in many RFID application systems such as logistics, access control, attendance system, anti-counterfeit and industrial production process control system. Features: 1 Self-intellectual property; 2 Support ISO18000-6C(EPC C1G2) , ISO18000-6B protocol tag; 3 860~868MHz, 902~928MHz frequency band(frequency customization optional); 4 FHSS or Fix Frequency transmission; 5 RF output power up to 13dbm(adjustable); 6 No external power source needed; 7 Built-in antenna with effect distance up to 200mm*; 8 Support USB2.0 interface with VSP(Virtual Serial Port) or HID mode; 9 Slim outline; 10 Provide SDK and demo software to facilitate further development. * Effective distance depends on protocol, tag and environment.
Waterproof Active 4+1 PoE Extender 1000Mbps
Feature ♦ 4*10/100/1000Mbps RJ45 port supply port, 1*10/100/1000Mbps RJ45 receiving port ♦ 4*IEEE802.3af/at/bt (PoE) powered port output ♦ Max power supply : the whole power is 90W; Output power of single port max 60W ♦ Max Distance : support VLAN ♦ Waterproof level IP65, used for outdoor
UHF CARD READER (USB) HWP-AIMW02CIQAG
Operating mode: HWP-AIMW02CIQAG 808 Transmitter Device can continuously transmit low-frequency 125 KHz signals to form a cover zone. Any low-frequency 125k tag entering the cover zone will receive a low-frequency ID code. The device can analyze the information such as the RSSI value of the low frequency signal strength, tag battery voltage status, and tag anti-dismantle status, etc. Then it replies the detailed information to the locating base station with 2.4GHz signal. 808 transmitter device can also receive the signal from the active single-frequency tag in real time and transmit the received data to the supervisory control system. In special applications, the data of the tags can also be written or the parameters can be changed. Recognition range: The effective recognition distance of the transceiver device is 10 cm, and the transmitting distance of 125K signal is 25 cm~95 cm. The distance can be controlled by adjusting parameters. 808 transmitting device can recognize the electronic tag signal in all directions. Recognition speed & capability: Recognition speed mainly depends on the time interval of the tag transmitting. 808 transmitter device can send the tag data to the computer without any delay after receiving it. If the tag is a read-write type, 808 transmitter device can also write relevant information into the tag. Capacity depends on the tag itself. Communication security: When the 808 transmitter device communicates with the tag, special communication protocol is used to verify the legitimacy of the device. In order to prevent data cracking, the meticulous encryption algorithm is developed to ensure data security in the communication process. Reliability: The product fully considers the application requirements of industrial environment such as anti-impact. The production process of the base station strictly conforms to the ISO 9001 quality standard. Multi-step quality inspection is implemented to ensure products with full performance requirements. Interface standard: 808 transmitter device provides USB2.0 standard hardware interface. If RS232 interface is required, please mark out when ordering. Agreement & Support: Standard software interface that conforms to Windows operating system environment is provided. The underlying communication protocol, related SDK development kits, DEMO soft wares and some development cases can be provided for reference.